Generador de 250 KW Deutz
- Delivery time: 30 days after the deposit is received.
- Warranty: 1 year or 5000 running hours.
- Payment terms: 30% as deposit, balance is paid before shipment.
- Packing: wood case.
1: Each ignition is controlled accurately by ECU (see enclosed picture)
2: Gas inlet is with Italian imported pressure-reducing valve (see enclosed picture)
3: Gas and air mixing is controlled by mixer imported from USA (IMPCO), electric governor is of Chinese top brand (see enclosed picture).
4: Ignition cable and sparkling plug are Chinese top brand
5: Engine protection functions (warning or stop engine when water temp is high, high oil pressure, high oil temp, high speed)
6: Show alternator and engine parameters by LCD screen.
7: automatically start genset or stop genset.
8: can realize the “ remote control” of the genset.
9: voltage output automatically adjusted by AVR module.
The gas generator will require the following:
1: Gas inlet pressure: 80KPA – 300 kpa
2: Methane content in the gas: 85% – 95%
3: Temperature: -30℃～40℃
4: Altitude: ≤ 4000m
5: Relative air humidity: ≤90％
6: The circulating water should be soft water, cooling water should be alkaline clean water, must not have rust compound, such as acid, chloride etc. Main request of water:
I: Hardness: 0.7～5.3me/L
II: Chloride: <150mg/L
III: PH: 7～8.5
After purification, the gas should have no liquid oil or water, the dust content of gas should be ＜10mg/m3, particle size of dust should be ＜50μm,sulfide ＜20 mg/m3. The purification of gas is very important to the life time of genset, the continuous running time should be less than 300 hours each time, then stop and maintain the genset, maintenance time should be about 3 hours each time.
GAS GENERATOR SET PARAMETERS
250GFT, SILENT TYPE
Original Deutz - BF8M1015
Water cooled, 4 stroke, V shaped cylinder
Genset rated output power
Steady-state voltage regulation
The transient voltage regulation rate
Voltage settling time
Voltage fluctuation rate
Frequency steady state regulation
Transient frequency regulation
Frequency recovery time
Frequency fluctuation rate
Voltage adjust range
8 cylinders V shaped
24V electric start
Big repair period
Turbo charged and inter-cooled
By sparkling plug
Pressure adjustment method
Adjust pressure automatically
Speed governing type
Forced and splashed type
Closed cooling with radiator (100% copper)
gAS eNGINE PARAMETERS
24V (electric start)
Turbo charged inter cooled
By sparkling plug
Heat consumption (kj/kw.h)
Gas pressure (kpa)
24v electric start
Oil consumption (g/kw.h)
Speed adjust method
By electric governor
Oil volume (L)
Closed with radiator
Water volume (L)
High temp 160
Low temp 140
Forced and splashed type Hight temp radiator
Overhaul time (h)
Noise level (Db)
gENERATOR SET PROTECTION FUNCTIONS
Alarm and stop for hight/low voltage
alarm for hight water temp
Alarm and stop for hight/low HZ
alarm for high oil temp
Alarm and stop for short circuit
alarm and stop for hight / low oil pressure
Alarm and stop for over speed
Alarm and stop for high current
Main switch adopts automatic smart air breaker, which has the protection function of higher current, low voltage etc.
When there is break, the main switch will cut off automatically and send light& sound signal.
It is with controller, all kinds of instruments, adjusting buttons, engine protection indicating light, emergency stop button etc, they are used to control and monitoring the genset work situation.
The genset speed is controlled by electric governor, and it can also be adjusted slightly by speed ajust button.
The output voltage is adjusted automatically( By AVR)
There is flow-charging device for battery in the cabinet.
tHE DASHBOARD CAN MONITOR THE FOLLOWING PARAMETERS:
3 phase AC output current and voltage
Low oil pressure alarm
high oil temp alarm
Inlet and outlet water temp
over speed alarm
Inlet Oil pressure
Speed adjust button
Voltage adjust button
Outlet Oil temp
Alarm for high temp
TOTALLY OFFER LIST
(with ignition cable, sparkling plug)
Common base frame
ATS system (without automatic transfer)
Tube fire blocker
Wave tube for exhaust
Battery, start cabinet
ECU for ignition
For silent type gas generator set:
1: noise level will reach to about 75dB at 6 m.
2: silent shell is 4mm thickness
3: with50mm thickness sound-enclosure cotton
4: with platic-spraying workmanship, high anti-rust performance.