Generador de 60 KW Deutz

Código BF8M1015 Categoría Marca

  • Delivery time: 120 days after the deposit is received.
  • Warranty: 1 year or 5000 running hours.
  • Payment terms: 30% as deposit, balance is paid before shipment.
  • Packing: wood case.
Share on facebook
Share on whatsapp

SPECIFICATIONS

1: Each ignition is controlled accurately by ECU (see enclosed picture)
2: Gas inlet is with Italian imported pressure-reducing valve (see enclosed picture)
3: Gas and air mixing is controlled by mixer imported from USA (IMPCO), electric governor is of Chinese top brand (see enclosed picture).
4: Ignition cable and sparkling plug are Chinese top brand
5: Engine protection functions (warning or stop engine when water temp is high, high oil pressure, high oil temp, high speed)
6: Show alternator and engine parameters by LCD screen.
7: Can realize “remote control” of the genset (optional)
8: Voltage output automatically adjusted by AVR module.
9: Rated output power is 60kw

The gas generator will require the following:
1: Gas inlet pressure: 1.5 bar – 5 bar
2: Methane content in the gas: 85% – 95%
3: Temperature: -30℃~40℃
4: Altitude: ≤ 4000m
5: Relative air humidity: ≤90%
6: The circulating water should be soft water, cooling water should be alkaline clean water, must not have rust compound, such as acid, chloride etc.
I: Hardness: 0.7~5.3me/L
II: Chloride: <150mg/L
III: PH: 7~8.5

Note:
After purification, the gas should have no liquid oil or water, the dust content of gas should be <10mg/m3, particle size of dust should be <50μm,sulfide <20 mg/m3. The purification of gas is very important to the life time of genset, the continuous running time should be less than 300 hours each time, then stop and maintain the genset, maintenance time should be about 3 hours each time.

GAS GENERATOR SET PARAMETERS

Genset model

60GFT, OPEN TYPE

Engine model

Deutz 6105

Engine Type

Water cooled, 4 stroke, cylinder inline

Genset rated output power

60kw

Rated voltage

380V

Phase

3 phase

HZ

50Hz

Rpm

1500 r/min

Power factor

0.8

Rated current

108A

Steady-state voltage regulation

≤±2%

The transient voltage regulation rate

≤±10%

Voltage settling time

≤1S

Voltage fluctuation rate

≤±0.5%

Frequency steady state regulation

≤0.5%

Frequency recovery time

≤3S

Frequency steady state regulation

≤0.5%

Voltage adjust range

95-105%

Heat consumption

≤7mj/kw.h

Oil consumption

≤1.0g/kw.h

Gas pressure

1.5-5 bar

Cylinders NO

6 cylinders in line

Bore

105mm

Stroke

130mm

Compression ratio

19:1

Start method

24V electric start

Big repair period

≥20000 hours

Noise level

≤90 Db

Intake method

Naturally aspirated

Ignition method

By sparkling plug

Pressure adjustment method

Adjust pressure automatically

Speed governng type

Electric governor

Lubricating method

Forced and splashed type

Cooling type

Closed cooling with radiator (100% copper)

Exhaust temp

≤650℃

Displacement

9.3L

Size

2350*980*1450mm

Weight

1250 kg

gAS eNGINE PARAMETERS

Engine power

68KW

Total displacement(L)

4.33

Engine model

Deutz 6105

Exhaust temp

≦650

Rated voltage

24V (electric start)

Shock range(mm/s)

≦0.4

Rated speed

1500

Intake method

Naturally aspirated

Power factor

0.8 (delay)

Ignition method

By spark plug

Heat consumption (kj/kw.h)

≦3000

Air consumption(m3/h)

15000

Gas pressure (kpa)

≧1.5

Start method

24v electric start

Oil consumption (g/kw.h)

≦1.0

Speed adjust method

By electric governor

Oil volume (L)

45

Cooling method

Closed with radiator

Water volume (L)

High temp 80
Low temp 60

Lubricating method
Radiator

Forced and splashed type Hight temp radiator

Overhaul time (h)

20000

Protection class

IP21

Noise level (Db)

≦90

Insulation class

H

Cylinders NO

6

Generating rate

98%

Emission

EURO 3

gENERATOR SET PROTECTION FUNCTIONS

Alarm and stop for hight/low voltage

alarm for hight water temp

Alarm and stop for hight/low HZ

alarm for high oil temp

Alarm and stop for short circuit

alarm and stop for hight / low oil pressure

Alarm and stop for over speed

Alarm and stop for high current

GENSET CONTROL

The control system is fixed to one end of genset (on the top of alternator). Main switch adopts automatic smart air breaker, which has the protection function of higher current, low voltage etc.
It is with 4 protection module which can send alarms when there is high water temperature, high oil temperature, high oil pressure and high speed.
The output voltage is adjusted automatically (by AVR)
There is flow-charging device for battery in the cabinet.

tHE DASHBOARD CAN MONITOR THE FOLLOWING PARAMETERS:

3 phase AC output current and voltage

Low oil pressure alarm

Engine speed

HZ

high oil temp alarm

Water temp

Battery voltage

over speed alarm

Oil pressure

Alarm for high water temp

Oil temp

Alarm and stop for high current

TOTALLY OFFER LIST

NAME

QUANTITY

NAME

QUANTITY

Gas Engine
(with ignition cable, spark plug)

1 piece

Alternator

1 piece

Common base frame

1 piece​

Silent shell

ATS system (without switch)

Control cable

1 set

Pressure-adjusted valve

1 piece​

Air-gas mixer
radiator

1 piece

Tube fire blocker

1 piece​

radiator

1 piece

Wave tube for exhaust

1 piece​

tools

1 set

Battery, start cabinet

1 set

Operation book

1 set

ECU for ignition

1 piece​

Ir arriba